This series of power supplies incorporate the high frequency switch mode technology to give highly regulated chassis mountable modular units with kV range varying from 10kV to 50kV catering to a wide variety of scientific and industrial applications that include XRF instruments for elemental analysis, electro-spinning, hi-pot testing electrophoresis, cable testing, etc.
| PARAMETER | SPECIFICATION |
|---|---|
| Input Voltage | 24V DC ± 10% |
| Output Voltage* | 0 to 10/20/30/40/50kV DC |
| Output Current | 0 to 1mA |
| Polarity * | Positive / Negative |
| Line Regulation | <0.05% for±10% variation in input voltage |
| Load Regulation | <0.1% for 10 to 100%load variation |
| Stability | <0.01%hour after 1 hour warm up |
| Protections | Against overload, arc and short-circuit During short circuit, internal circuitry limits the short circuit current |
| Front Panel | 24V DC input through 1.0sqm PVC wires Fuse holder with fuse (on top plate) RF connector for HV output 9 pin D-connector for remote control Stud for grounding the unit |
| Size | 5” x 9” x 3” (W x D x H) |
| Weight | 2.5kg |
| Output cable | 26” of HV DC cable |
| Pins | 28 Pin Pluggable Connector |
|---|---|
| 1 | Common |
| 2 | HV Enable (Active Low) |
| 3 | Voltage Program |
| 4 | Voltage Monitor |
| 5 | Current Program |
| 6 | Current Monitor |
| 7 | Reserved |
| 7 | Reserved |
| 7 | +10V DC Reference |
| Section | Description | Options | Options Description |
|---|---|---|---|
| 1 | Output Voltage | XX | Value of output voltage XX=10/20/30/40/50: For 10/20/30/40/50kV |
| 2 | Output Power | YY | Value of output power (XX x 1mA) YY=10/20/30/40/50W |
| 3 | Polarity | P N |
Positive Negative |
Download Datasheet