HF X-RAY GENERATOR FOR NDT SYSTEM

125kV / 160kV / 220kV, 5mA

This series of power supplies have been designed and developed for OEM application requiring continuous operation for NDT inspection in various fields.

Non -destructive testing is extremely valuable for evaluation, troubleshooting, research, and quality control in science and industry.

These compact high frequency units have to be connected to an X-Ray tube to generate X-Rays and are available in 3 models 125kV, 5mA; 160kV, 5mA and 220kV, 5mA. The high frequency output allows for lower kV per exposure and superior imaging for better evaluation.

Download Datasheet

IONICS - Specialists in HV-HC Power Supplies

TECHNICAL SPECIFICATIONS

PARAMETER

SPECIFICATION

Input Voltage

230V ±10% A C, 50Hz, single phase

No. of Output

Output Voltage1

Output Voltage2

125kV	160kV	220kV
0 to +62.5kV DC	0 to +80kV DC	0 to +110kV DC
0 to +62.5kV DC	0 to +80kV DC	0 to +110kV DC

Output Current

0 to 5mA

Filament Voltage and Current
As per tube selection by OEM

As per tube selection by OEM

Polarity

Positive and negative

Line Regulation

<0.1% for 10% variation in input voltage

Load Regulation

<0.5% for 10% load variation (tube current)

Mode of Operation

Constant voltage-constant current (x-ray anode current)

Protections

Overload, short-circuit and arc

Topology

SMPS

Cable and Connectors

To be supplied by the OEM

Housing	HT Tank
	Inverter

MS tank (550mmx329mmx246mm)

19” Rack (440mmx458mmx142mm)