This series of power supplies can generate output that ranges from 1kV to 150kV, 10kW to 20kW and are housed in compact 19″ racks to give a highly regulated output
| PARAMETER | SPECIFICATION | |
|---|---|---|
| Input Voltage | 415V ±10% A C, 50Hz, three phase | |
| Output Voltage Range* | 1kV DC to 150kV DC | |
| Output Power Range* | 10kW to 20kW | |
| Polarity | Positive / Negative | |
| Line Regulation | Better than 0.1% for±10% variation in input voltage | |
| Load Regulation | Better than 0.5% for 0 to 100% load variation | |
| Ripple | ≤0.5% rms at full rating | |
| Stability | <0.05%/hour after 1 hour warm-up | |
| Regulation Mode* | Constant Voltage – Constant Current | |
| Voltage & Current Control* | Local: By 10-turn potentiometers on the front panel Remote: 0 to 10V DC signals for voltage & current control; OR Control through computer interface |
|
| Protections* | Against over voltage, over load, short-circuit, and arc | |
| Remote Interface (Analog) through pluggable connector |
10V DC reference 10V DC HV enable signal 0 to 10V DC signal for voltage & current control 0 to 10V DC signal for voltage & current monitoring |
|
| Optional. Remote Interface (Digital) through D-Connector (External Ethernert/RS232 Microcontroller Module)# |
HV ON/OFF Voltage & current setting Voltage & current monitoring |
|
| Front Panel | Three phase indicators AC Power ON/OFF MCB with indication HV ON/OFF switch with indication 3½ digit voltage and current meters 10-turn potentiometers for voltage and current control Constant voltage – constant current mode indication LEDs for fault indications |
|
| Back Panel |
|
|
| Topology | High frequency resonant / PWM-controlled switch mode | |
| Switching Device | IGBT | |
| Cabinet | 4U to 8U 19″ rack mountable, powder coated |