The high frequency X-Ray Monoblock consists of an inverter and oil-filled tank which houses the high voltage transformer and tube. It has been designed and developed for OEM application in fluoroscopy and radiography C-arm units. The high radiation output allows for lower kV per exposure, shorter exposure and superior imaging.
| TECHNICAL SPECIFICATIONS | |||
|---|---|---|---|
| PARAMETER | XRC3.5 (3.5kW) | XRC5 (5kW) | XRC6 (6kW) |
| Input Voltage | 230V ±10% AC, 50Hz, single phase | ||
| Maximum Output Power |
30mA at 110kV 40mA at 80kV 80mA at 40kV |
40mA at 120kV 50mA at 100kV 100mA at 50kV |
50mA at 120kV 80mA at 75kV 100mA at 60kV |
| HF Generator Frequency | 80kHz | ||
| Protections | Over Voltage, Over Current, Over Temperature, Filament Fault, Earth Fault, Rotor Fault, Inverter Fault | ||
| Application | Suitable for Fluoroscopy and Radiography | ||
| Fluoroscopic Modes | Boosted, ABS, Continuous, Snap shot & Pulsed | Boosted, ABS, Continuous, Snap shot & Pulsed | Boosted, ABS, Continuous, Snap shot & Pulsed |
| Fluoroscopic kV Range | 40kV to 110kV in 70 steps | 40kV to 120kV in 80 steps | 40kV to 120kV in 80 steps |
| Continuous Mode | 0.5mA to 3mA | 0.5mA to 3mA | 0.5mA to 5mA |
| Single-Pulse & Multi-Pulse, Snap Shot, Boosted Fluoroscopy | 6mA and 8mA | 10mA and 15mA | 10mA and 15mA |
| Fluoro Timer | 0 to 3 min and reset | 0 to 3 min and reset | 0 to 5 min and reset |
| Continuous Exposure Time | 3 min ON / 8 min OFF (depends on tube) |
3 min ON / 8 min OFF (depends on tube) |
5 min ON / 5 min OFF (depends on tube) |
| Radiographic kV Range | 40kV to 110kV in 70 steps | 40kV to 120kV in 80 steps | 40kV to 120kV in 80 steps |
| Radiographic mA Range | 20mA to 80mA | 20mA to 100mA | 20mA to 100mA |
| mAs | 0.1 to 200mAs in 21 steps | ||
| Time | 10 ms to 5 s | ||
| X-Ray Tube Model | Stationary Anode Dual Focus |
Stationary Anode Dual Focus |
Rotating Anode Dual Focus |
| Focal Spot | 0.6 / 1.5 | 0.6 / 1.8 | 0.3 / 0.6 |
| Nominal Voltage | 110kV | 120kV | 120kV |
| Remote Control | Touch screen tablet with Microcontroller based control | ||
| Housing – Monoblock | Contains high voltage transformer, X-ray tube & filament transformers floating on high voltage | ||
| Housing – HF Inverter | Contains inverter, control cards, filament card and other interlocks | ||
| Size – Monoblock | 347mm × 182mm × 211mm | 347mm × 182mm × 211mm | 347mm × 192mm × 247mm |
| Size – HF Inverter | 233mm × 238mm × 220mm | ||
| Weight – Monoblock | 17 Kgs | 17 Kgs | 21.5 Kgs |
| Weight – HF Inverter | 10 Kgs | ||