This high current pulsed generator was designed and developed for research purpose in Mechanical and Aerospace Engineering.
| PARAMETER | SPECIFICATION |
|---|---|
| Input Voltage | 415V ±10% AC, 50Hz, three phase |
| Output Voltage (In Pulsed mode) | 5Vmax |
| Output Current Range | 0 to 2000A |
| Frequency Range | 0.2Hz to 100Hz variable |
| Frequency Control Range | Minimum to maximum of rated frequency range |
| Duty Cycle Control Range | 0 to 50% (10ms max) |
| Maximum Pulse ON Time | 1 to 10ms adjustable |
| Polarity | Positive |
| Mode of Operation | Pulsed. With a provision for single shot |
| Regulating Mode | Constant current |
| Regulation | ≤ 1%+IGBT drop |
| Controls Voltage Current Frequency Duty Cycle |
By 10-turn potentiometers on the front panel |
| Waveform reading | Terminals provided to read the output voltage and current waveform |
| Front Panel | Mains ON/OFF switch Power ON/OFF Switch Single alphanumeric display for peak voltage, peak current, frequency and duty cycle 10 turn potentiometers for voltage, current, frequency & duty cycle control Indications for 3 phase ON/OFF Faulty indications Push buttons for trip reset |
| Back Panel | Terminal block for 3 hhase mains input
Fuse holder with fuse Buss bar terminals for high current output Stud for grounding the unit |
| Topology | PWM-controlled switch mode |
| Regulating Device | IGBT |
| Cabinet | MS cabinet, powder coated |